What are the main methods of cleaning jaw crusher parts?

     jaw crusher parts after long-term use, crusher parts due to wear, deformation, fatigue, cavitation, loosening or other reasons, lose the original working performance, make the technical condition of the jaw crusher deteriorate, work abnormally, or even fail to work. The phenomenon of continuing to work, at this time, it is generally called that the jaw crusher has a fault.

    The reasons for the failure of  jaw crusher parts can be analyzed from four aspects: the normal mating relationship of the mating parts is destroyed; the relative position between the parts changes; the parts themselves are deformed, damaged, material changes and surface quality changes; parts Interim impurity blockage, etc. Then, in the process of using the jaw crusher, it will encounter the blockage of oil stains, which will cause the jaw crusher to not operate well. It is necessary to clean up these oil stains so that the machine can run well. Then clean these oil stains. What are the methods?

    The main methods of cleaning jaw crusher accessories are as follows:

    1. Scrub: put jaw crusher parts into a container filled with diesel oil, kerosene or other cleaning fluid, and scrub with cotton yarn or brush with a brush. This method is simple in operation and simple in equipment, but has low efficiency, and is suitable for a single small batch of small parts. Under normal circumstances, it is not suitable to use gasoline, because it is fat-soluble, it will damage people's health and it is easy to cause fire.

    2. Vibration cleaning: place the parts of the jaw crusher to be cleaned on the cleaning basket or cleaning rack of the vibrating cleaning machine, and immerse them in the cleaning solution. The vibration of the cleaning machine simulates the artificial rinsing action and the chemical action of the cleaning solution. Remove grease.

    3. Ultrasonic cleaning: The chemical action of the cleaning liquid and the ultrasonic oscillation introduced into the cleaning liquid work together to remove the oil stains on the parts of the jaw crusher.

    4. It is suitable for cleaning parts with less complex shape and serious grease on the surface.

    5. Cooking and washing: Put the prepared solution together with the cleaned parts of the jaw crusher into a cleaning pool of appropriate size welded with steel plates, heat it to 80~90℃ with a stove under the pool, cook and wash it for 3~ 5min is enough.

   jaw crusher The reasons for failure include accidental damage (such as blockage, loosening) caused by improper adjustment, use, and maintenance, and natural damage to parts due to wear, corrosion, cavitation, fatigue, etc. The former can be avoided, while the latter is unavoidable, but if you can find out the cause of the damage to the parts, master the law of damage, and take corresponding technical measures from design, manufacturing, use, and maintenance, the damage to the parts can be greatly reduced. , prolong the service life of jaw crusher.